CB 200 Refill
Reduces chlorine, taste and odors · Suspended Particle Retention in Water
Activated carbon compact filter element for 7" threaded housings. Reduces chlorine, taste and odor and retains sediments. Replaces the former HPC 200. Flow rate of 120 l/h.
- Max. flow rate
- 120 L/h
- Refill service life
- 6 months
- ≥ 5 a < 15 µm
- Classe C
- Sediment Retention
- Chlorine Reduction
- Taste and odor reduction
Our sales team responds within 24 business hours.
Overview
About this product
The CB 200 Refil is the filtration element in compacted activated carbon (Carbon Block technology) indicated for 7" threaded housings, replacing the former HPC 200.
The refil is formed by carbon compaction, meaning the entire body is made of carbon. Two polypropylene layers, external and internal, retain dirt particles and prevent the passage of carbon powder. The large amount of activated carbon allows a single product to have the necessary efficiency for filtration.
Main benefits:
- Carbon Block technology, which prevents preferential water pathways
- Reduces chlorine, unpleasant tastes and odors from water
- Internal and external layers for sediment retention
- Non-toxic and natural activated carbon
- Flow rate of 120 l/h
- Compatible with 7" threaded housings (Planeta Água, Acquabios, BBI, Acquaplus and Acqua Mil)
Usage recommendation: replaces the former HPC 200. Change the element when water flow reduction or alteration in taste and odor is observed.
Complies with NBR 16098:2012 standard.
Technical sheet
Technical specifications
Performance
- Max flow rate (L/h)
- 120 L/h
- Service life (months)
- 6 months
- Filtration class
- Classe C (≥ 5 a < 15 µm)
- Efficiency
- Sediment Retention · Chlorine Reduction · Taste and odor reduction
Operating conditions
- Water temperature
- 5 °C to 50 °C
- Working pressure
- 19.6 kPa to 392 kPa
- Installation position
- Vertical
Dimensions
- Height
- 17.6 cm
- Width
- 7 cm
- Depth
- 7 cm
Materials and refill
- Composition
- Compact activated carbon with polypropylene sheets
Standards and certificates
- Standards and certifications
- NBR
Installation
Step by step
Connections
- Installation position
- Vertical
- Inlet connection
- External thread 13 mm BSP
- Outlet connection
- External thread 13 mm BSP
In the box
- 1 CB 200 Refill
- Close the main water valve and leave the tap open until all water drains from the filter.
- Unscrew the filter bowl.
- Wearing a glove, unscrew the saturated refill. Rinse the cap, the o-ring and the filter bowl.
- Check the condition of the o-ring; if it is torn or dried out, replace it.
- Position the o-ring on the bowl's thread.
- Screw the refill onto the cap and then screw the bowl back onto the cap.
- Open the valve and let approximately 15 liters of water run through to eliminate carbon dust.
CB 200 Refill
SKU 917-2478