100% Brazilian manufacturer • 30 years making filters and refills
Hidrofiltros — Home
SKU 903-0574 HF ELX 10 Refill
Refill For Purifiers

HF ELX 10 Refill

Reduces chlorine, taste and odors · Suspended Particle Retention in Water

Triple filtration filter element with activated carbon (HPC). Reduces chlorine and retains sediments. Compatible with Electrolux purifiers PA10N, PA20G, PA25G, PA30G and PA40G. Flow rate of 50 l/h.

Max. flow rate
50 L/h
Refill service life
4,000 L
≥ 5 a < 15 µm
Classe C
  • Sediment Retention
  • Chlorine Reduction
  • Taste and odor reduction
Request a quote Find a reseller

Our sales team responds within 24 business hours.

NBR

Overview

About this product

The HF ELX 10 Refill is the filter element from the MultiUso Line recommended for replacement in Electrolux purifiers, featuring triple filtration and high efficiency in chlorine reduction.

The first layer, made of non-toxic polypropylene (Melt Blown process), retains dirt such as sand, clay and silt. Next, water passes through a bed of granulated activated carbon, responsible for chlorine reduction through HPC technology. Finally, in the clarification stage, a new polypropylene barrier prevents the passage of small carbon residues.

Main benefits:

  • Triple filtration, with sediment retention and chlorine reduction
  • Minimum reduction of 75% free chlorine until end of service life
  • HPC technology, with non-toxic granulated activated carbon
  • Flow rate of 50 l/h
  • Disposable filter element, no need for backwashing
  • Compatible with Electrolux purifiers PA10N, PA20G, PA25G, PA30G and PA40G

Usage recommendation: in case of premature element saturation, installation of a pre-filter is recommended. The product is intended for filtration of water that meets the potability parameters set by the Ministry of Health.

Complies with NBR 16098:2012 standard.

Technical sheet

Technical specifications

Performance

Max flow rate (L/h)
50 L/h
Service life (liters)
4,000 L
Service life (months)
6 months
Filtration class
Classe C (≥ 5 a < 15 µm)
Efficiency
Sediment Retention · Chlorine Reduction · Taste and odor reduction

Operating conditions

Water temperature
5 °C to 50 °C
Working pressure
19.6 kPa to 392 kPa
Installation position
Vertical

Dimensions

Height
21.5 cm
Width
6,6 cm
Depth
6,6 cm

Materials and refill

Composition
Polypropylene and granulated activated carbon

Standards and certificates

Standards and certifications
NBR

Installation

Step by step

Connections

Installation position
Vertical
Inlet connection
Snap fit
Outlet connection
Snap fit

In the box

  • 1 HF ELX 10 Refill
  1. Close the water shut-off valve that feeds the purifier.
  2. Unplug the purifier from the outlet.
  3. Access the compartment where the refill is located.
  4. Turn the saturated refill counterclockwise to remove it.
  5. Snap in the new refill by turning clockwise until the guide pins lock, then turn 1/4 turn until it locks.
  6. Make sure the refill is properly installed.
  7. Open the shut-off valve and plug the purifier back in.
  8. Press the reset button for 5 seconds (or until the change light blinks).
  9. Close the cover and discard the first liters to remove excess carbon.