Refill HF ELX 30/40
Reduces chlorine, taste and odors · Activated Carbon · Water Purifier · Twist & Change
Electrolux purifiers: PE11X, PE11B, PA21G, PA26G, PA31G, PC41X, PC41B, PH41B, PH41X
Triple filtration filter element with activated carbon (HPC). Reduces chlorine and retains sediments. Compatible with Electrolux purifiers PE11X, PA21G, PC41X and PH41B. Flow rate of 50 l/h.
- Max. flow rate
- 50 L/h
- Refill service life
- 5,000 L
- Chlorine reduction
- 75%
- ≥ 5 a < 15 µm
- Classe C
- Sediment Retention
- Chlorine Reduction
- Taste and odor reduction
Our sales team responds within 24 business hours.
Overview
About this product
The HF ELX 30/40 Refill is the filter element from the MultiUso Line recommended for replacement in Electrolux purifiers, with triple filtration and high efficiency in chlorine reduction.
The first layer, made of non-toxic polypropylene (Melt Blown process), retains dirt such as sand, clay and silt. Next, water passes through a bed of granulated activated carbon, responsible for chlorine reduction through HPC technology. Finally, in the clarification stage, a new polypropylene barrier prevents the passage of small carbon residues.
Main benefits:
- Triple filtration, with sediment retention and chlorine reduction
- Minimum reduction of 75% free chlorine until end of service life
- HPC technology, with non-toxic granulated activated carbon
- Flow rate of 50 l/h
- Disposable filter element, no backwashing required
- Compatible with Electrolux purifiers PE11X, PE11B, PA21G, PA26G, PA31G, PC41X, PC41B, PH41B and PH41X
Usage recommendation: in case of premature element saturation, installation of a pre-filter is recommended. The product is intended for filtration of water that meets the potability parameters of the Ministry of Health.
Complies with standard NBR 16098:2012.
Technical sheet
Technical specifications
Performance
- Max flow rate (L/h)
- 50 L/h
- Service life (liters)
- 5,000 L
- Service life (months)
- 6 months
- Filtration class
- Classe C (≥ 5 a < 15 µm)
- Chlorine reduction (%)
- 75 %
- Bacteriological filtration
- No
- Efficiency
- Sediment Retention · Chlorine Reduction · Taste and odor reduction
Operating conditions
- Water temperature
- 5 °C to 50 °C
- Working pressure
- 19.6 kPa to 392 kPa
- Installation position
- Vertical
Dimensions
- Height
- 27 cm
- Width
- 6,6 cm
- Depth
- 6,6 cm
Materials and refill
- Composition
- Polypropylene and granulated activated carbon
- Washable refill
- No
Standards and certificates
- Standards and certifications
- NBR 16098:2012
Compatibility
- Compatible models
- Electrolux purifiers: PE11X, PE11B, PA21G, PA26G, PA31G, PC41X, PC41B, PH41B, PH41X
Installation
Step by step
Connections
- Installation position
- Vertical
- Inlet connection
- Snap-fit
- Outlet connection
- Snap-fit
In the box
- 1 Refil HF ELX 30/40
- Close the water valve that supplies the purifier.
- Disconnect the purifier from the outlet.
- Access the compartment where the refill is located.
- Turn the saturated refill counterclockwise to remove it.
- Insert the new refill by turning clockwise until the guide pins engage, then turn 1/4 turn until it locks.
- Ensure the refill is properly installed.
- Open the valve and reconnect the purifier.
- Press the reset button for 5 seconds (or until the change light flashes).
- Close the cover and discard the first liters to remove excess carbon.
Refill HF ELX 30/40
SKU 903-0572