100% Brazilian manufacturer • 30 years making filters and refills
Hidrofiltros — Home
SKU 903-0581 HF GIO Refill
Refill For Purifiers

HF GIO Refill

Reduces chlorine, taste and odors · Suspended Particle Retention in Water

Filter element with Carbon Block technology. Reduces chlorine, taste and odor and retains sediments. Compatible with Lorenzetti Gioviale purifier. Flow rate of 50 l/h.

Max. flow rate
50 L/h
Refill service life
5,000 L
≥ 5 a < 15 µm
Classe C
  • Sediment Retention
  • Chlorine Reduction
  • Taste and odor reduction
Request a quote Find a reseller

Our sales team responds within 24 business hours.

NBR

Overview

About this product

The HF GIO Refil is the filter element from the MultiUso Line indicated for replacement in the Lorenzetti Gioviale purifier, with Carbon Block technology and high efficiency in chlorine reduction.

Produced with compacted activated carbon, it retains particles and reduces chlorine, tastes and odors from water. Carbon Block technology prevents preferential water pathways, ensuring that the entire volume passes through activated carbon and guaranteeing constant efficiency until end of service life.

Main benefits:

  • Carbon Block technology, which prevents preferential water pathways
  • Minimum reduction of 75% of free chlorine until end of service life
  • Reduces unpleasant tastes and odors and retains sediments
  • Flow rate of 50 l/h
  • Disposable filter element, no need for backwashing
  • Compatible with the Lorenzetti Gioviale purifier

Usage recommendation: in case of premature element saturation, installation of a pre-filter is recommended. The product is intended for the filtration of water that meets the potability parameters of the Ministry of Health.

Meets NBR 16098:2012 standard.

Technical sheet

Technical specifications

Performance

Max flow rate (L/h)
50 L/h
Service life (liters)
5,000 L
Service life (months)
6 months
Filtration class
Classe C (≥ 5 a < 15 µm)
Efficiency
Sediment Retention · Chlorine Reduction · Taste and odor reduction

Operating conditions

Water temperature
5 °C to 50 °C
Working pressure
19.6 kPa to 392 kPa
Installation position
Vertical

Dimensions

Height
20.5 cm
Width
11,6 cm
Depth
9,2 cm

Materials and refill

Composition
Activated carbon block

Standards and certificates

Standards and certifications
NBR

Installation

Step by step

Connections

Installation position
Vertical
Inlet connection
Snap-fit
Outlet connection
Snap-fit

In the box

  • 1 HF GIO Refill
  1. Close the water shutoff valve that feeds the purifier.
  2. Remove the water outlet spout by pulling it upward.
  3. Remove the front housing by pressing the two click latches (one on each side) and pull forward.
  4. Remove the refill by tilting it forward, disconnecting it from the rear section; then pull it to the left, disconnecting the lower clip.
  5. To install the new refill, tilt it and insert it into the water inlet duct until the latch limit and snap it into the rear cap.
  6. Reattach the front of the purifier and the outlet spout.
  7. Open the shutoff valve and let 15 liters of water flow to remove carbon particles.