100% Brazilian manufacturer • 30 years making filters and refills
Hidrofiltros — Home
SKU 903-0578 HF SFT Refill
Refill For Purifiers

HF SFT Refill

Reduces chlorine, taste and odors · Suspended Particle Retention in Water

Filter element with Carbon Block technology. Reduces chlorine, taste and odor and retains sediments. Compatible with Everest Baby, Fit, Slim, Star and Plus purifiers. Flow rate of 60 l/h.

Max. flow rate
60 L/h
Refill service life
5,000 L
≥ 5 a < 15 µm
Classe C
  • Sediment Retention
  • Chlorine Reduction
  • Taste and Odor Reduction
Request a quote Find a reseller

Our sales team responds within 24 business hours.

NBR

Overview

About this product

The HF SFT Refill is the filter element from the MultiUso Line indicated for replacement in Everest purifiers, featuring Carbon Block technology and high efficiency in chlorine reduction.

Produced with compacted activated carbon, it retains particles and reduces chlorine, tastes and odors from water. Carbon Block technology prevents preferential water pathways, ensuring that the entire volume passes through activated carbon and guaranteeing constant efficiency until the end of service life.

Key benefits:

  • Carbon Block technology, which prevents preferential water pathways
  • Minimum 75% reduction of free chlorine until the end of service life
  • Reduces unpleasant tastes and odors and retains sediments
  • Flow rate of 60 l/h
  • Disposable filter element, no backwashing required
  • Compatible with Everest Baby, Fit, Slim, Star and Plus purifiers

Usage recommendation: in case of premature element saturation, installation of a pre-filter is recommended. The product is intended for filtration of water that meets the potability parameters of the Ministry of Health.

Complies with NBR 16098:2012 standard.

Technical sheet

Technical specifications

Performance

Max flow rate (L/h)
60 L/h
Service life (liters)
5,000 L
Service life (months)
6 months
Filtration class
Classe C (≥ 5 a < 15 µm)
Efficiency
Sediment Retention · Chlorine Reduction · Taste and Odor Reduction

Operating conditions

Water temperature
5 °C to 50 °C
Working pressure
19.6 kPa to 392 kPa
Installation position
Vertical

Dimensions

Height
24 cm
Width
7,7 cm
Depth
7,7 cm

Materials and refill

Composition
Polypropylene and activated block carbon

Standards and certificates

Standards and certifications
NBR

Installation

Step by step

Connections

Installation position
Vertical
Inlet connection
Threaded
Outlet connection
Threaded

In the box

  • 1 HF SFT Refill
  1. Check that the upper o-ring is properly seated.
  2. Insert the plastic nut seal at the bottom of the refill.
  3. Close the inlet valve and open the natural and chilled water taps to relieve internal pressure.
  4. Unplug the unit from the outlet.
  5. Depending on the model (Star, Slim, Plus, Fit or Baby), loosen the plastic nut and turn the filter counterclockwise to disconnect it.
  6. Replace the refill.
  7. Secure the new refill in reverse order, according to your purifier model.
  8. Open the inlet valve, check for leaks, plug the unit back in and let at least 15 liters of natural water run through to eliminate carbon particles.