100% Brazilian manufacturer • 30 years making filters and refills
SKU 903-0538 New PP Refill
Refill For Purifiers

New PP Refill

Suspended Particle Retention in Water

Shielded polypropylene element with high efficiency in sediment retention such as sand, clay and silt. Compatible with Hoken purifiers. Flow rate of 60 l/h.

Max. flow rate
60 L/h
Refill service life
6 months
≥ 15 a < 30 µm
Classe D
  • Sediment Retention

Our sales team responds within 24 business hours.

NBR

Overview

About this product

The New PP Refill is the filtration element of the Hidro Multi Line indicated for replacement in Hoken purifiers. Shielded and highly resistant, it has high efficiency in sediment retention.

Its filtration element has Class D pores (15 to 30 microns), which allows it to remove unwanted particles coming from the plumbing, such as sand, clay and silt, before they reach the point of consumption.

Main benefits:

  • Shielded element with high resistance
  • High efficiency in retaining sand, clay, silt and rust
  • Particle Retention Class D (15 to 30 microns)
  • Flow rate of 60 L/h
  • Quick connection for 1/4" hoses (Ø 6.35 mm)
  • Compatible with Hoken purifiers

Usage recommendation: this refill only performs particle retention and does not reduce chlorine, tastes and odors. Replacement is recommended every 6 months or when a reduction in water flow is observed.

Complies with NBR 16098:2012 standard.


Technical sheet

Technical specifications

Performance

Max flow rate (L/h)
60 L/h
Service life (months)
6 months
Filtration class
Classe D (≥ 15 a < 30 µm)
Efficiency
Sediment Retention

Operating conditions

Water temperature
5 °C to 50 °C
Working pressure
19.6 kPa to 392 kPa
Installation position
Vertical

Dimensions

Height
18 cm
Width
7,8 cm
Depth
7,8 cm

Materials and refill

Composition
Polypropylene

Standards and certificates

Standards and certifications
NBR

Installation

Step by step

Connections

Installation position
Vertical
Inlet connection
Quick coupling 1/4" (6.35 mm)
Outlet connection
Quick coupling 1/4" (6.35 mm)

In the box

  • 1 New PP Refill
  1. Close the water shutoff valve that feeds the purifier.
  2. Disconnect the saturated refill from the hose/quick coupling.
  3. Connect the new refill observing the water inlet and outlet direction.
  4. Open the shutoff valve and check for possible leaks at the connections.