Clor Purifier Refill 9.3/4"
Reduces chlorine, taste and odors · Suspended Particle Retention in Water · Activated Carbon
Compact activated carbon filter element (Carbon Block) for Clor 9.3/4" purifiers. Reduces chlorine, taste and odor and retains sediments. Flow rate of 120 l/h.
- Max. flow rate
- 120 L/h
- Refill service life
- 6 months
- ≥ 5 a < 15 µm
- Classe C
- Sediment Retention
- Chlorine Reduction
- Taste and Odor Reduction
Our sales team responds within 24 business hours.
Overview
About this product
The Clor 9.3/4" Purifier Refill is the replacement filter element for Clor 9.3/4" purifiers, produced with compacted activated carbon (Carbon Block technology).
The refill is formed by carbon compaction, meaning the entire body is made of carbon. Two layers of polypropylene, external and internal, retain dirt particles and prevent carbon dust from passing through. The longer the water's contact time with the carbon, the better the dechlorination result.
Main benefits:
- Carbon Block technology, which prevents preferential water pathways
- Reduces chlorine, tastes and unpleasant odors from water
- Internal and external layers for sediment retention
- Non-toxic and natural activated carbon
- Flow rate of 120 l/h
- Compatible with Clor 9.3/4" transparent (code 907-0018) and white (code 907-0019) purifiers
Usage recommendation: replace the element when a reduction in water flow or change in taste and odor is observed.
Complies with NBR 16098:2012 standard.
Technical sheet
Technical specifications
Performance
- Max flow rate (L/h)
- 120 L/h
- Service life (months)
- 6 months
- Filtration class
- Classe C (≥ 5 a < 15 µm)
- Efficiency
- Sediment Retention · Chlorine Reduction · Taste and Odor Reduction
Operating conditions
- Water temperature
- 5 °C to 50 °C
- Working pressure
- 19.6 kPa to 392 kPa
- Installation position
- Vertical
Dimensions
- Height
- 24.8 cm
- Width
- 7 cm
- Depth
- 7 cm
Materials and refill
- Composition
- Blocked activated carbon with polypropylene layers
Standards and certificates
- Standards and certifications
- NBR
Installation
Step by step
Connections
- Installation position
- Vertical
- Inlet connection
- Snap-fit (filter housing)
- Outlet connection
- Snap-fit (filter housing)
In the box
- 1 Clor 9.3/4" Refill
- Close the main water valve and open the tap until all water drains from the filter.
- Unscrew the filter housing.
- Wearing a glove, remove the saturated filter element and wash the cap and housing with water and biodegradable soap.
- Check that the o-ring is properly seated in the cap (do not use thread tape on the cap).
- Insert the filter element and screw the housing back on. Open the main valve.
- Before consuming, let approximately 20 liters run through to eliminate carbon dust.
Clor Purifier Refill 9.3/4"
SKU 902-0009