100% Brazilian manufacturer • 30 years making filters and refills
Hidrofiltros — Home
SKU 905-0005 Refill FF 200
Refill For Housings

Refill FF 200

Suspended Particle Retention in Water

Polypropylene filter element for sediment retention such as sand, mud, silt and rust. Protects machines and equipment. Flow rate of 600 l/h.

Max. flow rate
600 L/h
Refill service life
6 months
≥ 5 a < 15 µm
Classe C
  • Sediment Retention
  • Retains rust, sand, mud and silt
Request a quote Find a reseller

Our sales team responds within 24 business hours.

NBR

Overview

About this product

The FF 200 Refill is the Filter Flux® line filter element indicated for sediment retention, compatible with various filters that use threaded elements.

Produced with 100% non-toxic polypropylene, its raw material is heated and extruded into small filaments that form the micropores of the filter element. This process enables efficient filtration throughout the product's service life, reducing even rust particles, which stain clothes and accumulate in equipment. With filtered water, the amount of soap needed for washing clothes is also reduced.

Key benefits:

  • 100% non-toxic polypropylene, with Melt Blown process
  • High efficiency in retaining sand, mud, silt and rust
  • Protects machines and equipment, extending their service life
  • Flow rate of 600 l/h
  • Disposable filter element, with no need for backwashing
  • Compatible with filters that use threaded elements

Usage recommendation: this refill only performs particle retention and does not reduce chlorine, tastes and odors. For chlorine reduction, combine it with an activated carbon element.

Complies with standard NBR 16098:2012.

Technical sheet

Technical specifications

Performance

Max flow rate (L/h)
600 L/h
Service life (months)
6 months
Filtration class
Classe C (≥ 5 a < 15 µm)
Efficiency
Sediment Retention · Retains rust, sand, mud and silt

Operating conditions

Water temperature
5 °C to 50 °C
Working pressure
19.6 kPa to 392 kPa
Installation position
Vertical

Dimensions

Height
14.5 cm
Width
6,3 cm
Depth
6,3 cm

Materials and refill

Composition
Polypropylene

Standards and certificates

Standards and certifications
NBR

Installation

Step by step

Connections

Installation position
Vertical
Inlet connection
External thread 1/2"
Outlet connection
External thread 1/2"

In the box

  • 1 Refill FF 200
  1. Close the main water valve and leave the tap open until all water drains from the filter.
  2. Press the button on the purifier cap (on models that have it) to reduce internal pressure.
  3. Unscrew the filter bowl.
  4. Wearing a glove, unscrew the saturated element and wash the cap and bowl with water and biodegradable soap.
  5. Verify that the o'ring is properly seated in the cap (do not use thread seal tape on the cap).
  6. Screw the element onto the cap, screw the bowl back on and open the main water valve.
  7. In case of leakage, check the connections and the tightness of the bowl.

See also