100% Brazilian manufacturer • 30 years making filters and refills
Hidrofiltros — Home
SKU 905-0004 Refill FF 230
Refill For Housings

Refill FF 230

Suspended Particle Retention in Water

Polypropylene filter element for retention of sediments such as sand, mud, silt and rust. Protects machines and equipment. Flow rate of 1,200 l/h.

Max. flow rate
1,200 L/h
Refill service life
6 months
≥ 5 a < 15 µm
Classe C
  • Sediment Retention
  • Retains rust, sand, mud and silt
Request a quote Find a reseller

Our sales team responds within 24 business hours.

NBR

Overview

About this product

The FF 230 Refill is the filter element from the Filter Flux® line designed for sediment retention in high flow rate installations, compatible with various filters that use threaded elements.

Produced with 100% non-toxic polypropylene, its raw material is heated and extruded into small filaments that form the micropores of the filter element. This process enables efficient filtration throughout the entire service life of the product, reducing even rust particles, which stain clothes and accumulate in equipment. With filtered water, the amount of detergent needed for washing clothes is also reduced.

Main benefits:

  • 100% non-toxic polypropylene, with Melt Blown process
  • High efficiency in retaining sand, mud, silt and rust
  • Protects machines and equipment, extending their service life
  • Flow rate of 1,200 l/h
  • Disposable filter element, no backwashing required
  • Compatible with filters that use threaded elements

Usage recommendation: this refill only performs particle retention and does not reduce chlorine, tastes and odors. For chlorine reduction, combine it with an activated carbon element.

Meets NBR 16098:2012 standard.

Technical sheet

Technical specifications

Performance

Max flow rate (L/h)
1,200 L/h
Service life (months)
6 months
Filtration class
Classe C (≥ 5 a < 15 µm)
Efficiency
Sediment Retention · Retains rust, sand, mud and silt

Operating conditions

Water temperature
5 °C to 50 °C
Working pressure
19.6 kPa to 392 kPa
Installation position
Vertical

Dimensions

Height
24.8 cm
Width
6,3 cm
Depth
6,3 cm

Materials and refill

Composition
Polypropylene

Standards and certificates

Standards and certifications
NBR

Installation

Step by step

Connections

Installation position
Vertical
Inlet connection
External thread 1/2"
Outlet connection
External thread 1/2"

In the box

  • 1 FF 230 Refill
  1. Close the main water valve and leave the tap open until all water drains from the filter.
  2. Press the button on the purifier lid (on models that have it) to reduce internal pressure.
  3. Unscrew the filter housing.
  4. Wearing a glove, unscrew the saturated element and wash the lid and housing with biodegradable soap and water.
  5. Check that the o'ring is properly seated in the lid (do not use thread sealant tape on the lid).
  6. Screw the element onto the lid, screw the housing back on and open the main water valve.
  7. If leaking occurs, check the connections and tighten the housing.

See also