Refill HF CSL
Reduces chlorine, taste and odors · Activated Carbon · Water Purifier · Twist & Change
Consul purifiers: CPB30AB, CPB30A, CPC31AB, CPC31AF, CPB34AB, CPB34AF, CPB34AS, CPB35AB, CPB35AF, CPB36AB, CPB36AF
Triple filtration filter element with activated carbon (HPC). Reduces chlorine and retains sediments. Compatible with Consul purifiers. Flow rate of 50 l/h.
- Max. flow rate
- 50 L/h
- Refill service life
- 3,500 L
- Chlorine reduction
- 75%
- ≥ 5 a < 15 µm
- Classe C
- Sediment Retention
- Chlorine Reduction
- Taste and Odor Reduction
Our sales team responds within 24 business hours.
Overview
About this product
The HF CSL Refill is the filter element of the MultiUso Line indicated for replacement in Consul purifiers, with triple filtration and high efficiency in chlorine reduction.
The first layer, made of non-toxic polypropylene (Melt Blown process), retains dirt such as sand, clay and silt. Next, water passes through a bed of granulated activated carbon, responsible for chlorine reduction through HPC technology. Finally, in the clarification stage, a new polypropylene barrier prevents the passage of small carbon residues.
Main benefits:
- Triple filtration, with sediment retention and chlorine reduction
- Minimum reduction of 75% of free chlorine until end of service life
- HPC technology, with non-toxic granulated activated carbon
- Flow rate of 50 l/h
- Disposable filter element, no backwashing required
- Compatible with Consul purifiers
Usage recommendation: in case of early saturation of the element, installation of a pre-filter is recommended. The product is intended for filtration of water that meets the potability parameters of the Ministry of Health.
Complies with NBR 16098:2012 standard.
Technical sheet
Technical specifications
Performance
- Max flow rate (L/h)
- 50 L/h
- Service life (liters)
- 3,500 L
- Service life (months)
- 6 months
- Filtration class
- Classe C (≥ 5 a < 15 µm)
- Chlorine reduction (%)
- 75 %
- Bacteriological filtration
- No
- Efficiency
- Sediment Retention · Chlorine Reduction · Taste and Odor Reduction
Operating conditions
- Water temperature
- 5 °C to 50 °C
- Working pressure
- 19.6 kPa to 392 kPa
- Installation position
- Vertical
Dimensions
- Height
- 25.3 cm
- Width
- 5 cm
- Depth
- 5 cm
Materials and refill
- Composition
- Polypropylene and granulated activated carbon
- Washable refill
- No
Standards and certificates
- Standards and certifications
- NBR 16098:2012
Compatibility
- Compatible models
- Consul purifiers: CPB30AB, CPB30A, CPC31AB, CPC31AF, CPB34AB, CPB34AF, CPB34AS, CPB35AB, CPB35AF, CPB36AB, CPB36AF
Installation
Step by step
Connections
- Installation position
- Vertical
- Inlet connection
- Snap-fit
- Outlet connection
- Snap-fit
In the box
- 1 HF CSL Refill
- 1st Close the water supply shut-off valve.
- 2nd Press the button until water stops flowing.
- 3rd Turn the refill counterclockwise and remove it by pulling upward.
- 4th Insert the new refill by turning it clockwise until it locks in place.
- 5th Allow approximately 15 liters of water to flow through the refill before consuming, removing excess carbon.
- 6th Replace the purifier battery (positive side up) and press the reset button, if available.
Refill HF CSL
SKU 903-0575