HF EQL Refill
Raises pH · Reduces chlorine, taste and odors · Suspended Particle Retention in Water
Filter element with HPC and ALK technologies. Reduces chlorine, retains sediments and raises water pH. Compatible with IBBL purifiers. Flow rate of 40 l/h.
- Max. flow rate
- 40 L/h
- Refill service life
- 4,000 L
- ≥ 5 a < 15 µm
- Classe C
- Sediment Retention
- Chlorine Reduction
- Alkaline (raises pH)
- Alkaline water (raises pH)
- Taste and odor reduction
Our sales team responds within 24 business hours.
Overview
About this product
The HF EQL Refill is the filter element from the MultiUso Line indicated for replacement in IBBL purifiers, with HPC and ALK technologies: in addition to particle retention and chlorine reduction stages, it features a layer of alkaline minerals that raises the water's pH.
The first layer, made of non-toxic polypropylene (Melt Blown process), retains dirt. Next, water encounters a bed of granulated activated carbon (HPC technology) for chlorine reduction. Then it passes through a bed of alkaline minerals that raise the pH. Finally, in the clarification stage, it passes through another polypropylene barrier.
Main benefits:
- Four filtration stages, with sediment retention and chlorine reduction
- ALK technology, which raises water pH through the addition of alkaline minerals
- Minimum reduction of 75% free chlorine by end of service life
- Flow rate of 40 l/h
- Disposable filter element, with no need for backwashing
- Compatible with IBBL Immaginare, PDF, FRQ600, FRQ600 Expert and PFN purifiers
Usage recommendation: in case of premature element saturation, installation of a pre-filter is recommended. The product is intended for filtration of water that meets the potability parameters of the Ministry of Health.
Complies with standard NBR 16098:2012.
Technical sheet
Technical specifications
Performance
- Max flow rate (L/h)
- 40 L/h
- Service life (liters)
- 4,000 L
- Service life (months)
- 6 months
- Filtration class
- Classe C (≥ 5 a < 15 µm)
- Efficiency
- Sediment Retention · Chlorine Reduction · Alkaline (raises pH) · Alkaline water (raises pH) · Taste and odor reduction
Operating conditions
- Water temperature
- 5 °C to 50 °C
- Working pressure
- 19.6 kPa to 392 kPa
- Installation position
- Vertical
Dimensions
- Height
- 20.5 cm
- Width
- 6,8 cm
- Depth
- 6,8 cm
Materials and refill
- Composition
- Polypropylene, granulated activated carbon and alkaline minerals
Standards and certificates
- Standards and certifications
- NBR
Installation
Step by step
Connections
- Installation position
- Vertical
- Inlet connection
- Snap-fit
- Outlet connection
- Snap-fit
In the box
- 1 HF EQL Refill
- Close the purifier service valve.
- Turn the refill 1/4 turn following the cap indication and detach it from the purifier.
- Connect the new refill to the purifier base and turn it 1/4 turn following the cap indication.
- Open the service valve and ensure there are no leaks.
- Discard the first liters of water to remove excess carbon.
- Done, your refill is installed.
Also compatible with
HF EQL Refill
SKU 903-0547