HF+3 Pre-Filter Refill
Suspended Particle Retention in Water
Non-toxic polypropylene pre-filter that retains suspended particles and preserves the service life of the chlorine reduction refill. Compatible with IBBL purifiers. Flow rate of 40 L/h.
- Max. flow rate
- 40 L/h
- Refill service life
- 6 months
- ≥ 5 a < 15 µm
- Classe C
- Sediment Retention
Our sales team responds within 24 business hours.
Overview
About this product
The HF+3 Pre-Refill is the filter element of the MultiUso Line that acts as a pre-filter in IBBL purifiers, retaining suspended particles in the water and preparing it for the refill responsible for chlorine reduction.
Produced in non-toxic polypropylene by the Melt Blown process, it is indicated for applications where water arrives with many suspended particles, preserving the service life of the element installed next.
Main benefits:
- Particle and sediment retention suspended in water
- Extends the service life of the chlorine reduction refill installed in sequence
- Non-toxic polypropylene with Melt Blown process
- Flow rate of 40 L/h
- Disposable filter element, no backwashing required
- Compatible with IBBL purifiers
Usage recommendation: this refill performs only particle retention and does not reduce chlorine, tastes and odors. It should be used together with a chlorine reduction refill.
Complies with NBR 16098:2012 standard.
Technical sheet
Technical specifications
Performance
- Max flow rate (L/h)
- 40 L/h
- Service life (months)
- 6 months
- Filtration class
- Classe C (≥ 5 a < 15 µm)
- Efficiency
- Sediment Retention
Operating conditions
- Water temperature
- 5 °C to 50 °C
- Working pressure
- 19.6 kPa to 392 kPa
- Installation position
- Vertical
Dimensions
- Height
- 20.5 cm
- Width
- 6,8 cm
- Depth
- 6,8 cm
Materials and refill
- Composition
- Polypropylene
Standards and certificates
- Standards and certifications
- NBR
Installation
Step by step
Connections
- Installation position
- Vertical
- Inlet connection
- Snap-fit
- Outlet connection
- Snap-fit
In the box
- 1 Pre-Filter Refill HF+3
- Close the purifier's service valve.
- Turn the refill 1/4 turn following the lid indicator and disengage it from the purifier.
- Connect the new refill to the purifier base and turn it 1/4 turn following the lid indicator.
- Open the service valve and check that there are no leaks.
- Discard the first liters of water to remove excess carbon.
- Done, your refill is installed.
HF+3 Pre-Filter Refill
SKU 903-0549