HF+3 Refill
Reduces chlorine, taste and odors · Suspended Particle Retention in Water
Triple filtration filter element with activated carbon (HPC). Reduces chlorine and retains sediments. Compatible with IBBL purifiers. Flow rate of 40 L/h.
- Max. flow rate
- 40 L/h
- Refill service life
- 4,000 L
- ≥ 5 a < 15 µm
- Classe C
- Sediment Retention
- Chlorine Reduction
- Reduction of tastes and odors
Our sales team responds within 24 business hours.
Overview
About this product
The HF+3 Refil is the filter element from the MultiUso Line indicated for replacement in IBBL purifiers, with triple filtration and high efficiency in chlorine reduction.
The first layer, made of non-toxic polypropylene (Melt Blown process), retains dirt such as sand, clay and silt. Next, the water encounters a bed of granulated activated carbon, responsible for chlorine reduction through HPC technology. Finally, in the clarification stage, the water passes through a new polypropylene barrier, which prevents the passage of small carbon residues.
Main benefits:
- Triple filtration, with sediment retention and chlorine reduction
- Minimum reduction of 75% of free chlorine until end of service life
- HPC technology, with non-toxic granulated activated carbon
- Flow rate of 40 l/h
- Disposable filter element, with no need for backwashing
- Compatible with IBBL Immaginare, PDF, FRQ600, FRQ600 Expert and PFN purifiers
Usage recommendation: in case of premature saturation of the element, installation of a pre-filter is recommended. The product is intended for filtration of water that meets the potability parameters of the Ministry of Health.
Complies with NBR 16098:2012 standard.
Technical sheet
Technical specifications
Performance
- Max flow rate (L/h)
- 40 L/h
- Service life (liters)
- 4,000 L
- Service life (months)
- 6 months
- Filtration class
- Classe C (≥ 5 a < 15 µm)
- Efficiency
- Sediment Retention · Chlorine Reduction · Reduction of tastes and odors
Operating conditions
- Water temperature
- 5 °C to 50 °C
- Working pressure
- 19.6 kPa to 392 kPa
- Installation position
- Vertical
Dimensions
- Height
- 20.5 cm
- Width
- 6,8 cm
- Depth
- 6,8 cm
Materials and refill
- Composition
- Polypropylene and granulated activated carbon
Standards and certificates
- Standards and certifications
- NBR
Installation
Step by step
Connections
- Installation position
- Vertical
- Inlet connection
- Snap-fit
- Outlet connection
- Snap-fit
In the box
- 1 HF+3 Refill
- Close the purifier's service valve.
- Twist the refill 1/4 turn following the cap indicator and detach it from the purifier.
- Connect the new refill to the purifier base and twist it 1/4 turn following the cap indicator.
- Open the service valve and ensure there are no leaks.
- Discard the first liters of water to remove excess carbon.
- Done, your refill is installed.
Also compatible with
HF+3 Refill
SKU 903-0536