HF+7 Refill
Bacteriological · Reduces chlorine, taste and odors · Suspended Particle Retention in Water
Filter element with HPC and BAC technologies. Reduces chlorine, retains sediments and ensures bacteriological efficiency. Compatible with IBBL purifiers. Flow rate of 40 l/h.
- Max. flow rate
- 40 L/h
- Refill service life
- 3,000 L
- ≥ 5 a < 15 µm
- Classe C
- Sediment Retention
- Chlorine Reduction
- Taste and odor reduction
- Bacteriological efficiency
Our sales team responds within 24 business hours.
Overview
About this product
The HF+7 Refill is the filter element from the MultiUso Line indicated for replacement in IBBL purifiers, with HPC and BAC technologies: in addition to particle retention and chlorine reduction stages, it features a layer of bacteriological minerals that ensures the bacteriological efficiency of the refill.
The first layer, of non-toxic polypropylene (Melt Blown process), retains dirt. Next, water encounters a bed of granulated activated charcoal (HPC technology) for chlorine reduction. Then, a bed of bacteriological minerals ensures bacteriological efficiency. Finally, in the clarification stage, it passes through another polypropylene barrier.
Key benefits:
- Four filtration stages, with sediment retention and chlorine reduction
- BAC technology, with proven bacteriological efficiency
- Minimum reduction of 75% of free chlorine by end of service life
- Flow rate of 40 l/h
- Disposable filter element, no backwashing required
- Compatible with IBBL purifiers Immaginare, PDF, FRQ600, FRQ600 Expert and PFN
Usage recommendation: in case of premature element saturation, installation of a pre-filter is recommended. The product is intended for filtration of water that meets the potability parameters of the Ministry of Health.
Complies with standard NBR 16098:2012.
Technical sheet
Technical specifications
Performance
- Max flow rate (L/h)
- 40 L/h
- Service life (liters)
- 3,000 L
- Service life (months)
- 6 months
- Filtration class
- Classe C (≥ 5 a < 15 µm)
- Bacteriological filtration
- Yes
- Efficiency
- Sediment Retention · Chlorine Reduction · Taste and odor reduction · Bacteriological efficiency
Operating conditions
- Water temperature
- 5 °C to 50 °C
- Working pressure
- 19.6 kPa to 392 kPa
- Installation position
- Vertical
Dimensions
- Height
- 20.5 cm
- Width
- 6,8 cm
- Depth
- 6,8 cm
Materials and refill
- Composition
- Polypropylene, granulated activated carbon and bacteriological minerals
Standards and certificates
- Standards and certifications
- NBR
Installation
Step by step
Connections
- Installation position
- Vertical
- Inlet connection
- Snap-fit
- Outlet connection
- Snap-fit
In the box
- 1 HF+7 Bac Refill
- Close the purifier service valve.
- Turn the refill 1/4 turn following the cap indicator and detach it from the purifier.
- Connect the new refill to the purifier base and turn it 1/4 turn following the cap indicator.
- Open the service valve and ensure there are no leaks.
- Discard the first liters of water to remove excess carbon.
- Done, your refill is installed.
Also compatible with
HF+7 Refill
SKU 903-0560