Clor Blist 5" White Purifier
Reduces chlorine, taste and odors · Suspended Particle Retention in Water · Activated Carbon
Filtration system for kitchens and sinks with blocked activated carbon element. Reduces chlorine, taste and odor and retains sediments. Flow rate of 90 L/h.
- Max. flow rate
- 90 L/h
- Refill service life
- 6 months
- ≥ 5 a < 15 µm
- Classe C
- Sediment Retention
- Chlorine Reduction
- Taste and odor reduction
Our sales team responds within 24 business hours.
Clor Purifier Refill 5"
Official replacement refill for this product.
Overview
About this product
The Clor Blist 5" White Purifier is the system indicated for water filtration in kitchens and sinks, reducing dirt and also chlorine, unpleasant smell and taste from water.
It features a blocked activated carbon filter element, responsible for water purification and maximum chlorine reduction. Blocked carbon increases filtration efficiency and prevents preferential water pathways, ensuring greater contact time between water and carbon.
Main benefits:
- Non-toxic and natural activated carbon, with Carbon Block technology
- Reduces chlorine, unpleasant tastes and odors from water
- Retains sediments such as sand, mud and silt
- Flow rate of 90 l/h, suitable for sinks and consumption points
- Easy installation, under the sink or at the point of use
- Disposable filter element, no backwashing required
Usage recommendation: replace the filter element when a reduction in water flow or changes in taste and odor are observed.
Compatible refill: Clor 5" Purifier Refill (code 902-0012).
Complies with Ministerial Ordinance PRC MS nº 5/2017 from the Ministry of Health and standard NBR 16098:2012.
Technical sheet
Technical specifications
Performance
- Max flow rate (L/h)
- 90 L/h
- Service life (months)
- 6 months
- Filtration class
- Classe C (≥ 5 a < 15 µm)
- Efficiency
- Sediment Retention · Chlorine Reduction · Taste and odor reduction
Operating conditions
- Water temperature
- 5 °C to 50 °C
- Working pressure
- 19.6 kPa to 392 kPa
- Installation position
- Vertical
Dimensions
- Height
- 18.5 cm
- Width
- 12,2 cm
- Depth
- 7 cm
Materials and refill
- Composition
- Cup and cap in polypropylene; element in blocked activated carbon
Standards and certificates
- Standards and certifications
- NBR
Installation
Step by step
Connections
- Installation position
- Vertical
- Inlet connection
- Internal thread 1/2"
- Outlet connection
- Internal thread 1/2"
In the box
- 1 Clor Blist 5" Purifier
- 1 Filter Element (Clor 5" Refill)
- Nipple
- O'ring seal
- 1st Close the main water shutoff valve and choose the best location for installation.
- 2nd Check the necessary components and use thread seal tape on the connections.
- 3rd Check that the o'ring seal is properly seated in the cap.
- 4th Observe the IN (inlet) and OUT (outlet) indications on the filter cap.
- 5th Install the nipple at the water inlet and fix the filter (IN) to the nipple.
- 6th Fit the tap to the unit (OUT) or the downstream piping (water coolers, coffee machines, etc.).
- 7th When using for the first time, let approximately 20 liters run to eliminate carbon dust.
Maintenance
How to replace the refill
-
Step 01
Close the main shutoff valve and open the tap until the filter empties.
-
Step 02
Unscrew the filter cup.
-
Step 03
With a glove, remove the saturated filter element and wash the cup and cap with water and biodegradable soap.
-
Step 04
Check the o'ring seal on the cap (do not use thread seal tape on the cap).
-
Step 05
Insert the new element and screw the cup. Open the shutoff valve.
-
Step 06
Before consuming, release approximately 20 liters to eliminate carbon dust.
Also compatible with
Clor Blist 5" White Purifier
SKU 907-0020