Clor Purifier Refill 5"
Reduces chlorine, taste and odors · Suspended Particle Retention in Water · Activated Carbon
Activated carbon compact (Carbon Block) filter element for Blist and Clor 5" purifiers. Reduces chlorine, taste and odor and retains sediments. Flow rate of 80 l/h.
- Max. flow rate
- 80 L/h
- Refill service life
- 6 months
- ≥ 5 a < 15 µm
- Classe C
- Sediment Retention
- Chlorine Reduction
- Taste and Odor Reduction
Our sales team responds within 24 business hours.
Overview
About this product
The Clor 5" Purifier Refill is the replacement filter element for Blist 5" and Clor 5" purifiers, manufactured with compacted activated carbon (Carbon Block technology).
The refill is formed by carbon compaction, meaning the entire body is made of carbon. Two polypropylene layers, external and internal, retain dirt particles and prevent carbon dust from passing through. The large amount of activated carbon allows a single product to have the necessary efficiency for filtration — the longer the water's contact time with the carbon, the better the dechlorination result.
Main benefits:
- Carbon Block technology, which prevents preferential water pathways
- Reduces chlorine, unpleasant tastes and odors from water
- Internal and external layers for sediment retention
- Non-toxic and natural activated carbon
- Flow rate of 80 L/h
- Compatible with Blist 5" and Clor 5" purifiers (white and transparent)
Recommendation for use: replace the element when water flow reduction is observed or when taste and odor changes occur.
Complies with standard NBR 16098:2012.
Technical sheet
Technical specifications
Performance
- Max flow rate (L/h)
- 80 L/h
- Service life (months)
- 6 months
- Filtration class
- Classe C (≥ 5 a < 15 µm)
- Efficiency
- Sediment Retention · Chlorine Reduction · Taste and Odor Reduction
Operating conditions
- Water temperature
- 5 °C to 50 °C
- Working pressure
- 19.6 kPa to 392 kPa
- Installation position
- Vertical
Dimensions
- Height
- 12.7 cm
- Width
- 7 cm
- Depth
- 7 cm
Materials and refill
- Composition
- Activated carbon block with polypropylene sheets
Standards and certificates
- Standards and certifications
- NBR
Installation
Step by step
Connections
- Installation position
- Vertical
- Inlet connection
- Snap-fit (filter housing)
- Outlet connection
- Snap-fit (filter housing)
In the box
- 1 Clor 5" Refill
- Close the main water shutoff valve and open the tap until all water drains from the filter.
- Unscrew the filter housing.
- Wearing gloves, remove the saturated filter element and rinse the lid and housing with water and biodegradable soap.
- Check that the o-ring is properly seated in the lid (do not use thread tape on the lid).
- Insert the filter element and screw the housing back on. Open the main shutoff valve.
- Before consuming, let approximately 20 liters run to eliminate carbon dust.
Clor Purifier Refill 5"
SKU 902-0012