Dual AS2 Purifier

Suspended Particle Retention in Water · Reduces chlorine, taste and odors

Portable dual-filtration purifier, electricity-free, for wall or countertop installation. Retains sediments and reduces chlorine, taste and odor. Flow rate of 60 l/h.

Max. flow rate: 60 L/h
Refill service life: 6,000 L
≥ 5 a < 15 µm: Classe C

Sediment Retention
Chlorine Reduction
Taste and Odor Reduction

Our sales team responds within 24 business hours.

Dual AS2 Refill

Official replacement refill for this product.

INMETRO NBR

Overview

About this product

The Dual AS2 Purifier is a portable and easy-to-install model that does not require electrical power and can be mounted on the wall or placed on the kitchen sink or countertop. It is a complete solution for residences and offices, combining pre-filtration and purification in a single unit.

It features two filter elements: the first, made of non-toxic polypropylene (Filter Flux® technology), reduces dirt from the piping, such as sand, mud, silt and rust; the second, made of compacted activated carbon (Carbon Block), has high efficiency in reducing chlorine, taste and unpleasant odors from the water.

Main benefits:

Dual filtration: sediment retention and chlorine reduction in a single unit
Disposable filter elements, with no need for backwashing
Flow rate of 60 l/h
Does not require electrical power
Practical installation, on wall or countertop
Portable design, suitable for residences and offices

Usage recommendation: to ensure water quality, replacement of filter elements is recommended every 6,000 liters, 6 months or when a reduction in water flow is observed.

Compatible refill: Dual AS2 Refill (code 928-0003).

Complies with Health Ministry Regulation PRC MS nº 5/2017 and standard NBR 16098:2012.

Technical sheet

Technical specifications

Performance

Max flow rate (L/h): 60 L/h
Service life (liters): 6,000 L
Service life (months): 6 months
Filtration class: Classe C (≥ 5 a < 15 µm)
Efficiency: Sediment Retention · Chlorine Reduction · Taste and Odor Reduction

Operating conditions

Water temperature: 5 °C to 50 °C
Working pressure: 19.6 kPa to 392 kPa
Installation position: Vertical

Dimensions

Height: 35 cm
Width: 29,5 cm
Depth: 12,5 cm

Materials and refill

Composition: Polypropylene and activated carbon
Washable refill: No

Standards and certificates

Standards and certifications: INMETRO · NBR

Installation

Step by step

Connections

Installation position: Vertical
Inlet connection: 1/2" Thread and 1/4" Quick Connection
Outlet connection: Proprietary Faucet

In the box

1 Dual Purifier
2 Filter Elements (Filter Flux and Carbon Block)
Diffuser
85 cm Hose
Filter Wrench
Wall Bracket
Anchors and Screws

Close the tap shutoff valve and ensure the tubing is clean.
Choose the installation location: on the sink or fixed to the wall (use the template from the manual; anchors and screws are included).
Check the tap thread model; for internal thread, install the hex adapter and verify the sealing ring.
Thread the diffuser's chrome end onto the tap.
Open the tap shutoff valve and check for possible leaks at the connections.
Before consuming, release approximately 15 liters of water to remove dust from the filter element.

Maintenance

How to replace the refill

View refill

Step 01

Close the tap shutoff valve.
Step 02

Using the filter wrench, open the cartridges and remove the saturated elements.
Step 03

Replace the refills and send the saturated elements to selective collection.
Step 04

Verify that the o'ring is properly seated in the cap.
Step 05

Close the cartridges by hand; if there is leakage, use the wrench to complete the closure.
Step 06

Before consuming, release approximately 15 liters of water to remove carbon dust.