Dual AS2 Refill
Suspended Particle Retention in Water · Reduces chlorine, taste and odors
Set of two filter elements (Filter Flux® and Carbon Block) for the Dual AS2 Purifier. Retains sediments and reduces chlorine, taste and odor. Flow rate of 60 l/h.
- Max. flow rate
- 60 L/h
- Refill service life
- 6,000 L
- ≥ 5 a < 15 µm
- Classe C
- Sediment Retention
- Chlorine Reduction
- Taste and Odor Reduction
Our sales team responds within 24 business hours.
Overview
About this product
The Dual AS2 Refill is the replacement set for the Dual AS2 Purifier and contains two filter elements, one for each filtration stage.
The first is produced with 100% non-toxic polypropylene (Filter Flux® technology): the raw material is heated and extruded into small filaments that form the refill's micropores, allowing efficient filtration throughout its service life. The second features Carbon Block technology, produced with compacted activated carbon; the entire body is formed by carbon, with an external polypropylene layer for particle retention and to prevent carbon dust passage.
Key benefits:
- Dual filtration: sediment retention and chlorine, taste and odor reduction
- Disposable filter elements, no backwashing required
- Flow rate of 60 L/h
- Easy replacement, which can be performed by the user
- Compatible with the Dual AS2 Purifier (code 916-0004)
Usage recommendation: to guarantee water quality, replacement is recommended every 6,000 liters, 6 months or when water flow reduction is observed.
Complies with NBR 16098:2012 standard.
Technical sheet
Technical specifications
Performance
- Max flow rate (L/h)
- 60 L/h
- Service life (liters)
- 6,000 L
- Service life (months)
- 6 months
- Filtration class
- Classe C (≥ 5 a < 15 µm)
- Efficiency
- Sediment Retention · Chlorine Reduction · Taste and Odor Reduction
Operating conditions
- Water temperature
- 5 °C to 50 °C
- Working pressure
- 19.6 kPa to 392 kPa
- Installation position
- Vertical
Dimensions
- Height
- 24.8 cm
- Width
- 7 cm
- Depth
- 7 cm
Materials and refill
- Composition
- Polypropylene and activated carbon
- Washable refill
- No
Standards and certificates
- Standards and certifications
- NBR
Installation
Step by step
Connections
- Installation position
- Vertical
- Inlet connection
- Snap-fit connection (purifier housing)
- Outlet connection
- Snap-fit connection (purifier housing)
In the box
- 1 Filter Flux Element
- 1 Carbon Block Element
- Close the tap shut-off valve.
- Using the filter wrench, open the housings and remove the saturated elements.
- Replace the refills and dispose of the saturated elements in selective collection.
- Verify that the o'ring is properly seated in the lid.
- Close the housings manually; if there is leakage, use the wrench to complete the closure.
- Before consuming, release approximately 15 liters of water to eliminate the carbon dust.
Dual AS2 Refill
SKU 928-0003