Clor 5" White Purifier
Reduces chlorine, taste and odors · Suspended Particle Retention in Water · Activated Carbon
Filtration system for water coolers and taps with blocked activated carbon element. Reduces chlorine, taste and odor and retains sediments. Flow rate of 80 l/h.
- Max. flow rate
- 80 L/h
- Refill service life
- 6 months
- ≥ 5 a < 15 µm
- Classe C
- Sediment Retention
- Chlorine Reduction
- Taste and Odor Reduction
Our sales team responds within 24 business hours.
Clor Purifier Refill 5"
Official replacement refill for this product.
Overview
About this product
The Clor 5" White Purifier is the system indicated for water filtration in water coolers and taps, reducing dirt and also chlorine, unpleasant odor and taste from the water.
It features a blocked activated carbon filter element, responsible for maximum chlorine reduction, which also performs particle retention such as sand, mud and silt before they reach the point of consumption.
Main benefits:
- Non-toxic and natural activated carbon, with Carbon Block technology
- Reduces chlorine, unpleasant tastes and odors from water
- Retains sediments such as sand, mud and silt
- Flow rate of 80 l/h, suitable for small residences and businesses
- Easy installation, under the sink or at the point of use
- Disposable filter element, no need for backwashing
Usage recommendation: replace the filter element when a reduction in water flow or change in taste and odor is observed.
Compatible refill: Clor 5" Purifier Refill (code 902-0012).
Complies with Portaria PRC MS nº 5/2017 from the Ministry of Health and the NBR 16098:2012 standard.
Technical sheet
Technical specifications
Performance
- Max flow rate (L/h)
- 80 L/h
- Service life (months)
- 6 months
- Filtration class
- Classe C (≥ 5 a < 15 µm)
- Efficiency
- Sediment Retention · Chlorine Reduction · Taste and Odor Reduction
Operating conditions
- Water temperature
- 5 °C to 50 °C
- Working pressure
- 19.6 kPa to 392 kPa
- Installation position
- Vertical
Dimensions
- Height
- 18.5 cm
- Width
- 12,2 cm
- Depth
- 7 cm
Materials and refill
- Composition
- Cup and cap in polypropylene; element in blocked activated carbon
Standards and certificates
- Standards and certifications
- NBR
Installation
Step by step
Connections
- Installation position
- Vertical
- Inlet connection
- Internal thread 1/2"
- Outlet connection
- Internal thread 1/2"
In the box
- 1 Clor 5" Purifier
- 1 Filter Element (Clor 5" Refill)
- Nipple
- O'ring
- 1st Close the main water valve and choose the best location for installation.
- 2nd Check the necessary components and use thread seal tape on the connections.
- 3rd Make sure the o'ring is properly seated in the cap.
- 4th Observe the IN (inlet) and OUT (outlet) markings on the filter cap.
- 5th Install the nipple at the water inlet and attach the filter (IN) to the nipple.
- 6th Attach the tap to the unit (OUT) or the downstream tubing (water coolers, coffee machines, etc.).
- 7th On first use, let approximately 20 liters run to eliminate carbon dust.
Maintenance
How to replace the refill
-
Step 01
Close the main valve and open the tap until the filter empties.
-
Step 02
Unscrew the filter cup.
-
Step 03
With a glove, remove the saturated filter element and wash the cup and cap with water and biodegradable soap.
-
Step 04
Check the o'ring on the cap (do not use thread seal tape on the cap).
-
Step 05
Insert the new element and screw on the cup. Open the valve.
-
Step 06
Before consuming, release approximately 20 liters to eliminate the carbon dust.
Also compatible with
Clor 5" White Purifier
SKU 907-0024